REQUIREMENTS
1. Install USB Driver for Samsung Galaxy S4 I9505 on the computer.
2. Enable USB Debugging Mode on the phone.
3. The Galaxy S4 I9505 should be factory unlocked and not locked to any particular carrier.
4. The CF-Auto-Root file works only on Samsung Galaxy S4 I9505 (Snapdragon). Applying this
on any incorrect variant will brick the device. Verify the model number of the Galaxy S4 by
navigating to Settings >> About Phone.
5.Download the required files
5.Download the required files
INSTRUCTIONS
1. Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting
tool.
2. Switch off the Galaxy S4 I9505. Then boot the device into Download Mode by pressing and
2. Switch off the Galaxy S4 I9505. Then boot the device into Download Mode by pressing and
holding Volume Down + Home buttons together and then press the Power button until the
device turns on. Now press the Volume Up button to enter Download Mode.
3. Launch Odin on the computer.
4. Connect the Galaxy S4 I9505 to the computer using USB cable while it is in the Download
3. Launch Odin on the computer.
4. Connect the Galaxy S4 I9505 to the computer using USB cable while it is in the Download
Mode. Wait until Odin detects the device. When the device is connected successfully, the ID:
COM box will turn yellow with the COM port number. Additionally, the successful connected
will be indicated by a message saying Added. If Odin fails to detect the device then re-install
USB driver
5. In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
6. Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure
5. In Odin, click the PDA button and select the CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 file.
6. Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure
the Re-Partition option in Odin is not selected.
7. Double-check and click Start in Odin. The installation process will now begin.
8. Once flashing completed, your phone will restart and soon you will see a PASSmessage with
7. Double-check and click Start in Odin. The installation process will now begin.
8. Once flashing completed, your phone will restart and soon you will see a PASSmessage with
green background in the left-most box at the very top of the Odin. You can now unplug the
USB cable to disconnect your device from computer.
Congratzzzz you have successfully rooted Galaxy S4!!!!!!!!!!!!!!!!!!!
Congratzzzz you have successfully rooted Galaxy S4!!!!!!!!!!!!!!!!!!!
0 comments:
Post a Comment