HOW TO UPDATE GALAXY S4 WITH 4.3 JELLYBEAN

REQUIREMENTS

1. Install USB Driver for Samsung Galaxy S4 I9505 on the computer.
2. Enable USB Debugging Mode
3. The Galaxy S4 I9505 should be factory unlocked and not locked to any particular carrier.
4. Root Galaxy S4 I9505  -->here
5. Install Custom Recovery(TWRP or CWM)
6. The leaked Android 4.3 Jelly Bean firmware is compatible only with Samsung Galaxy S4   

    I9505.
7. Download the required files

- Android-4.3-I9505GUEUBMFP-Odexed-I9505.zip
MD5: 363ED9CC32A841A512E72372A19C7D05
- Android-4.3-I9505GUEUBMFP-Deodexed-I9505.zip
MD5: 74D241B64266220161018EB98A19F279

INSTRUCTIONS

1. Connect the Galaxy S4 I9505 to the computer using USB cable.
2. Copy the Android 4.3 Jelly Bean Firmware file to internal SD card of your phone.
3. Once the file transfer process is completed, switch off the phone and disconnect it from 

    computer.
4. Boot the device into CWM Recovery by pressing and holding Volume Up, Home, and 

    Power buttons together until the device turns on.
5. (optional) In CWM Recovery mode, create a Nandroid backup of your currently installed 

    ROM by navigating to Backup and Restore >> Backup. Once backup process is completed, 

    return to main recovery menu.
6. Perform a Wipe data/Factory Reset (Necessary due to new Android version).
7. Select install zip from sdcard and then choose zip from sdcard. Now, navigate to the Leaked 

    Android 4.3 Jelly Bean Firmware file that you copied earlier and confirm the installation.

8. Once installation process is completed, return to main recovery menu and select Reboot 

    System Now.

Congratzzz you have suceesfully updated your Galaxy S4 to 4.3 JB!!!!!!!!!!