REQUIREMENTS
1. Install USB Driver for Samsung Galaxy S4 I9505 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer
Options.
3. The Galaxy S4 I9505 should be factory unlocked and not locked to any particular carrier.4. The ClockworkMod Recovery file works only on Samsung Galaxy S4 I9505. Applying this to
any incorrect variant might brick the device. Verify the model number of the Galaxy S4 I9505
by navigating to Settings >> About Phone.
5.Download the required files
INSTRUCTIONS
1. Extract Odin 3.07 file using winrar/7zip/winzip or any other extracting tool.
2. Switch off the Galaxy S4 I9505. Then boot the device into Download Mode by pressing and
holding Volume Down + Home buttons together and then press the Power button until the
device turns on. Now press the Volume Up button to enter Download Mode.
3. Launch Odin on the computer.
4. Connect the Galaxy S4 I9505 to the computer using USB cable while it is in the Download
Mode. Wait until Odin detects the device. When the device is connected successfully, the ID:
COM box will turn blue with the COM port number. Additionally, the successful connected will
be indicated by a message saying Added.
5. In Odin, click the PDA button and select the i9505-cwm-recovery-6.0.3.2(0611).tar file.
6. Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure
the Re-Partition option in Odin is not selected.
7. Double-check and click Start in Odin. The installation process will now begin.
8 Once the installation process is completed, your phone will restart and soon you will see a
PASS message with green background in the left-most box at the very top of the Odin. You
can now unplug the USB cable to disconnect your device from computer.
Congratzzzz you have successfully installed CWM recovery on your Samsung Galaxy S4!!!!!!!!!!
0 comments:
Post a Comment