Friday, 13 December 2013

Filled Under: , , ,

GIMLO ROM FOR XPERIA J

Share


FEATURES


  • AROMA Installer
  • Based on Xperia Miro 11.0.A.5.5 Firmware
  • Deodex
  • Zipalign
  • Prerooted
  • Init.d support
  • For both locked and unlocked bootloaders
  • For both custom and stock kernels
  • Include the NXT stuff like framework, settings, small apps, magnification glass, bravia engine 2, ...
  • You can include your own apk's files (applications), into the zip file of the rom, they will be automatically installed



REQUIREMENTS


  •  ICS kernel or Vengeance ICS 1.40 (Here) as default 
  • CWM Recovery installed (If you have unlocked bootloader and you use boot.img,after flash go back to stock ICS kernel)

DOWNLOAD Here


INSTRUCTIONS

  1. Flash ICS 11.0.a.7.5 or. 28 and wait that rom boot up!!
  2. Put Gimlo HDPI Firmware 11.0.A.5.5.zip and Gimlo-v2.0.zip on SD card
  3. Boot to CWM recovery
  4. Go to Mount and Storage, format system,cache,data, go back and "wipe data/factory reset,dalvik cache,wipe cache
  5. Install the Gimlo HDPI Firmware 11.0.A.5.5 zip first ("install zip from sdcard" -> "choose zip from sdcard)
  6. Reboot phone
  7. Wait until your phone will boot up successfully (you will see lockscreen)
  8. Now reboot phone and boot into cwm recovery
  9. Flash Gimlo-v2.0 zip ("install zip from sdcard" -> "choose zip from sdcard)
  10. Wait that your phone start completely. And don't try to configure anything or to do other things as the NXT framework is not yet available. Your phone will work fine but the install is not complete yet.
  11. Restart your phone.
  12. During the boot, a short time after the "Sony" logo, your phone will restart again automatically. Don't be afraid it's normal.
  13. That's all, just wait that your phone start completely.

NOTE: if you got a bootloop during the initial boot

Do not install directly the Gimlo Rom after the Gimlo Firmware. Make a reboot between both of their installation. And after the restart, make a "wipe data/factory reset" again before to start the install ofGimlo Rom.

BUGS:

If you can't mount USB and charge go to settings/Xperia/connectivity/and change from MTP mode toMSC,and if you want working MTP mode,change it back and now it will all works !!!

SCREENSHOTS





0 comments: