In this post i am gonna show you how to install CWM recovery in your Micromax A1116 Canvas HD
REQUIREMENTS
1.Root and MOBILE UNCLE TOOLS APP(if u want to flash through Mobile)
2.Sp Flash Tool(If u want to flash it From PC)
CWM for Micromax Canvas HD
download
SP Flash tool
download
Kernel Source
download
INSTRUCTIONS VIA PHONE
1.Download the recovery and Put it in root of your SDCARD
2.Open Mobile uncle tools and select Recovery Update
3.Flash recovery-cwm-6.0.3.0.img file
4.Done
INSTRUCTION VIA PC
1. Install drivers for your phone using Micromax drivers.
2. Extract the Stock ROM folder and replace recovery.img with cwm recovery.
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
5.Check only recovery.img, preloader and uncheck all others.
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. In Flash Tool, go to Options and Click USB Mode so that it is enabled. Click options again and then go to DA Download All > Speed and finally select High Speed.
8. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
9. Connect your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
10. After the process completes, a green ring will appear on your device signalling that the process was successful.
11.Disconnect your phone.
Congratzzz you have install CWM in your Micromax Canvas HD!!!!!!!!!
0 comments:
Post a Comment